DreamBox Receivers

Review / Information / downloads

HOME | FAQ | Contact | FreeSat| | Links to Related sites | Sitemap|
07756 482 669

 

Dreambox Receivers (Linux)

 

Models and basic features
dream 500

 

dm600

HD

  • HD
  • 2 CAM slots
  • 1 Card slot
  • supports USB HDD
  • Diseqc motor or multi satellite control
  • Blind scan
  • 2 USB ports
    Ethernet LAN port
    HD
  • HD

     

  • - Aspect ratio adjustment 4:3 (16/9 crop), 4:3 (16/9 Letterbox), 16:9 (4/3 pillar box)
    - User friendly OSD & operation
    - Total 8,000 TV & Radio channels programmable
    - Multi-language audio support including text support
    - Favourite channel selections
    - Parental guide and rating control
    - EPG (Provider Electronic Programme Guide) for on-screen channel information
    - On-screen display with 65,536 colours
    - Blind scan (power scan)
    - Zoom function in pause
    - Dolby Digital Bitstream out through S/PDIF (optical & coaxal)
    - Selectable output for 1080i, 720p, 480p and 480i formats
    - HDMI 1.1, Component (YPbPr), Composite
    - USB 2.0 Host (access to HDD, USB memory, others etc): 2 port
    - Upgrade software & update channel database through USB 2.0 port and RS232
    - MP3 file play by USB 2.0
    - PVR Ready via USB
    - Recorded file play on PC
    - Reservation recording by EPG
    - Multimedia file play by USB 2.0
    - Ethernet/LAN port
    - Home streaming

dreambox 800  
   

 

 

 

Specifications: -

  • 250 MHz PowerPC Processor (350 Mips)
  • Linux Operating System
  • 1 x Smartcard-Reader
  • MPEG2 Hardware decoding
  • Satellite Tuner (DVB-S)
  • V.24/RS232 Interface
  • 10/100Mbit compatible Ethernet Interface
  • 2 LED status
  • 32 MByte Flash, 96 MByte Ram total
  • Integrated IDE UDMA66 Interface
  • Support for internal HDD 2.5" in any capacity
  • Unlimited channel lists for TV/Radio
  • Channel-change time < 1 second
  • Full automatic service scan
  • Supports directly bouquet-lists
  • Supports EPG (electronic program guide)
  • Supports own videotext
  • Supports multiple LNB-Switching control (DiSEqC)
  • Fully adaptable OSD in many languages and skin-support
  • S/PDIF Interface for digital bit stream out (AC-3)
  • 1 x Scart-interfaces
  • S-Video connector
  • Analogue modem

DBS-Tuner:

  • Frequency Range 950 .... 2150 MHz
  • Signal Level - 65 dBm .... - 25 dBm
  • Signal-to-Noise Level 12 dB max.
  • DBS-Tuner Input Connector F-Type female
  • Input Impedance 75 Ohm
  • AFC +/- 3 MHz
  • Demodulation Shaped QPSK
  • FEC Viterbi and Reed-Solomon
  • Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation
  • Roll-off Factor 35 %
  • Demultiplexing according ISO 13818-1

Video decoder:

  • Video Compression MPEG-2 and MPEG-1 compatible
  • Video Standard PAL G/ 25 Hz
  • Video Formats 4:3 / 16:9
  • Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart)
  • Letterbox precolating for 4:3 TV-Device

Audio decoder:

  • Audio compression MPEG-1 & MPEG-2 Layer I and II
  • Audio Mode Dual (main/sub), Stereo
  • Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Output analogue:

  • Output Level L/R 0,5 Vss on 600 Ohm
  • THD > 60 dB (1 kHz)
  • Crosstalk < -65 dB

Output digital:

  • Output Level 0,5 Vss on 75 Ohm
  • Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
  • S/PDIF-Output optical (AC3)

Video parameter:

  • Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
  • Teletext filter in conformity with ETS 300 472 Standard

TV-Scart:

  • Output: FBAS,RGB,S-Video

Serial Interface RS 232:

  • Type RS232 bidirectional
  • Bitrate 115,2 kBit/s max.
  • Plug Connector SUB-D-9
  • Function: Update of Firmware

Ethernet:

  • 10/100 MBit compatible interface
  • Function: Update of Firmware, Connect to PC

UDMA66 IDE Interface:

  • Internal - for connection of 2.5" HDD

LNB Power and polarisation:

  • LNB Current 500mA max.; short-circuit-proof
  • LNB Voltage vertical < 14V without load, > 11,5V at 400mA
  • LNB Voltage horizontal < 20V without load, > 17,3V at 400mA
  • LNB shut-off at Standby-Mode

Count of active satellite positions:

  • DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
  • DiSEqC - Rotor Control

Power consumption:

  • < 15W / 12V

Input voltage:

  • DC12V,ripple +/- 15%

External power supply:

  • Input: 110-240V AC / 50-60Hz / 0,6A
  • Output: 12V = / 2,5A

Physical specification:

  • Ambient Temperature +15°C...+35°C
  • Humidity < 80%
  • Size (W x D x H): 195 mm x 130 mm x 40 mm

 

Satellite Tv Europe

Home Page

Questions? just email me or tel 07756 482 669

info@satellitetveurope.co.uk

Web Design by Andrew copyright © Satellite tv Europe